A standard Pokémon card is 2.5 x 3.5 inches. In metric, that is 63.5 x 88.9 mm, or 6.35 x 8.89 cm. The shape is a 5:7 portrait rectangle with rounded corners.
This guide gives you the exact Pokemon card dimensions, plus jumbo cards, display specs, and pixel sizes for printing.
Table of Contents
Pokemon Card Dimensions in Inches, MM, CM & Pixels

What are the dimensions of Pokemon cards? Every regular card is the same size.
| Measurement | Inches | Millimeters | Centimeters |
|---|---|---|---|
| Width | 2.5 in | 63.5 mm | 6.35 cm |
| Height | 3.5 in | 88.9 mm | 8.89 cm |
| Thickness | about 0.012 in (12 pt) | about 0.3 mm | about 0.03 cm |
| Corner radius | about 1/8 in | about 3.2 mm | about 0.32 cm |
| Weight | n/a | about 1.7 to 1.8 g | n/a |
| Aspect ratio | 5:7 | 1:1.4 | n/a |
You will also see 63 x 88 mm. It is the same card, rounded down. Sleeve makers often list it that way, as Cards AI points out.
The size has held steady since the game launched in 1996, according to Inches Guide. So a Base Set card from the 1990s fits the same sleeve as a card from this year. You can see the game itself at the official Pokémon TCG site.
Understanding the precise dimensions of a Pokémon card helps collectors choose the right sleeves, storage cases, and display options. Similarly, planning the perfect recreational space requires accurate measurements, and our guide to standard pool table sizes and room dimensions explains how to choose the right table and ensure enough space for comfortable gameplay.
Holo and textured cards can run a little thicker. The extra foil layer adds a few hundredths of a millimeter, per xBindr.
Pokemon Card Size in Pixels
Printing custom cards or building a digital binder? Use these sizes.
| Resolution | Card size in pixels | Best use |
|---|---|---|
| 72 DPI | 180 x 252 px | Web thumbnail |
| 150 DPI | 375 x 525 px | Draft print |
| 300 DPI | 750 x 1050 px | Standard print |
| 600 DPI | 1500 x 2100 px | Fine print or archive scan |
Printers cut with a small margin of error. So artwork needs a print bleed of 0.125 in on every side. That makes the canvas 2.75 x 3.75 in, or 825 x 1125 px at 300 DPI. Keep key text 0.125 in inside the cut line.
In Procreate, set the canvas to 2.75 x 3.75 in at 300 DPI. Going higher cuts your available layers, as Inches Guide notes.
Pokemon Card Sizes: Standard, Jumbo & Japanese

Are all Pokemon cards the same size? Every card made for play is. That includes English, Japanese, French, and Korean prints.
Are Japanese Pokemon cards smaller? No. The myth comes from Yu-Gi-Oh!, whose cards are 59 x 86 mm. Sleeves sold as “Japanese size” fit those cards. They are too tight for a Pokémon card.
Jumbo Pokemon Card Size
Jumbo cards are oversized promos. They come in special boxes and collections. They do not fit standard sleeves or toploaders.
There is no single official jumbo size. Sources list different numbers:
- About 136 x 187 mm (5.37 x 7.37 in): jumbos printed since 2020, per Wargamer.
- About 145 x 200 mm (5.7 x 7.9 in): older jumbos, per Cards AI.
So measure your jumbo card before you buy a holder.
Pokemon Card Size vs Other Cards
| Item | Size | Same sleeves as Pokémon? |
|---|---|---|
| Magic: The Gathering | 63 x 88 mm | Yes |
| Lorcana, Riftbound | 63 x 88 mm | Yes |
| Baseball cards | 2.5 x 3.5 in | Yes |
| Poker playing cards | 2.5 x 3.5 in | Yes |
| Bridge playing cards | 57 x 89 mm | No |
| Yu-Gi-Oh! | 59 x 86 mm | No |
| Credit card (upright) | 54 x 85.6 mm | n/a |
No ruler nearby? Stand a credit card beside your card. The Pokémon card should be about 9.5 mm wider, per xBindr. A folded US dollar bill is also close. It stands about 3.07 in tall, per Inches Guide.
For paper sizes, an A5 sheet is 148 x 210 mm. A Pokémon card is far smaller.
Pokemon Card Display Size: Sleeves, Toploaders & Cases

This is where size becomes practical. Each layer is a little bigger than the one inside it.
| Holder | Size | Best for |
|---|---|---|
| Perfect fit sleeve | about 64 x 89 mm | Inner layer for double sleeving |
| Standard sleeve | about 66 x 91 mm | Play, binders, daily use |
| Toploader | 3 x 4 in outside | A sleeved card, up to 35 pt |
| One-touch magnetic holder | Rated in pt | Display and valuable cards |
| 9-pocket binder page | Larger than the card | Binders |
| PSA slab | about 136 x 80 mm | Graded cards |
Standard sleeves leave about 1 mm of play on each side. That helps the card slide in without catching a corner. Dragon Shield lists its standard sleeves at 66 x 91 mm, as Cards AI reports.
Double sleeving is simple. Put the card in a perfect fit sleeve first. Then slide that into a standard sleeve. This keeps out dust and moisture.
Toploaders have an outer size of 3 x 4 in. Ultra Pro rates its regular toploader for standard cards up to 35 pt thick. A thicker holder only lets the card slide around.
Graded Slab Size
A graded slab is bigger than the card inside it. A PSA slab measures about 136 x 80 mm and about 6.25 mm thick, per PreGradeCards. PSA does not publish the outside size, so these are caliper measurements.
Other graders differ. BGS slabs are thicker, about 8.5 mm. SGC slabs are wider. So a display stand cut for PSA may not fit a BGS or SGC slab.
Before you buy a stand, frame, or case, check which holder it is made for.
How to Measure a Pokemon Card and Spot Fakes by Size

You do not need calipers.
- Ruler: The card should read 2.5 x 3.5 in.
- Credit card: Compare the width, as shown above.
- Phone measure app: Quick, but less exact.
Size is a good first check. Real cards are cut tightly. Inches Guide lists a tolerance of about ±0.2 to ±0.3 mm. Lay a suspect card on one you know is real. Line up a corner and look at the edges.
Size alone does not prove a card is real. Good fakes can match the dimensions. Also check:
- Corners: Real cards have a clean, even 1/8 in curve.
- Thickness: Fakes feel too thin or waxy.
- Light test: A real card blocks most light through its dark core.
- Print quality: Check the font, the back color, and the holo pattern.
Weight is a weaker test. Sources disagree on how reliable it is. xBindr says authentic cards vary by about 0.1 g between series. Use weight only with other checks.
FAQs
What are the dimensions of Pokemon cards?
A standard Pokémon card is 2.5 x 3.5 inches. That is 63.5 x 88.9 mm, or 6.35 x 8.89 cm. It is about 0.3 mm thick. Every regular English and Japanese card shares this size.
Is a Pokémon card 3.5 inches?
Yes, in height. A Pokémon card is 3.5 inches tall and 2.5 inches wide. Turn it sideways, and it is 3.5 inches across.
Are Pokemon cards 3×4 inches?
No. A card is 2.5 x 3.5 inches. The 3 x 4 inch size is the outside of a regular toploader. It holds a sleeved card with room to spare.
Are Pokemon cards A5 size?
No. A5 paper is 148 x 210 mm. A Pokémon card is 63.5 x 88.9 mm. That makes an A5 sheet more than twice as wide and tall.
Conclusion
A standard Pokémon card is 2.5 x 3.5 inches, or 63.5 x 88.9 mm. Jumbo cards and graded slabs are the main exceptions.

Rehmaan Khan is a Measurement Content Researcher Specializing in MLmeasurement, Size Guides, Charts, and Simple Educational Measurement Content.